Operation on the Machine > Scanning
Scan the Image by Selecting the Destination (Quick
Scan)
Execute scanning from KYOCERA Client Tool.
You need to configure the settings of Quick Scan and TWAIN using KYOCERA Client Tool. Refer to
the PC (KYOCERA Client Tool) on page
KYOCERA Client Tool needs to be operated on the computer (Host PC) connected to the machine via USB.
1
2
7-16.
Place the originals on the machine.
Loading Originals (page 5-2)
Execute scanning on the Host PC.
1
Start KYOCERA Client Tool as explained in
18.
2
Click
[Scan to
PDF],
1
•
Scan to PDF
Scanning starts. When scanning finishes, the
the PDF file name and the folder in which the image will be saved.
•
Scan to Email
Scanning starts. When scanning finishes, the mailer starts and the scanned image is
attached. Enter the address, subject and message, and then send.
•
Scan to Folder
The
[Browse for
Folder] dialog appears. Specify the folder in which the image will be
saved, and click [OK]. Scanning starts.
Accessing KYOCERA Client Tool on page 2-
[Scan to
Email] or
[Scan to
5-34
Folder] icon on the [Scan] tab.
2
[Save PDF File
As] dialog appears. Specify
Default Settings on