Adjusting With The Remote Control - NEC NP-VE281 User Manual

3. Projecting an Image (Basic Operation)

Adjusting with the remote control

1. Press the KEYSTONE button.
The Keystone bar will be displayed.
2. Use the or button to correct the keystone distortion.
Adjust so that the right and left sides are parallel.
3. Press the ENTER button.
NOTE:
• The maximum range of vertical keystone correction is +/−40 degrees. This maximum range may be smaller depending on the
signal or aspect ratio setting. The Keystone correction range will also be smaller when 3D mode is enabled.
• The range of keystone correction is not the maximum tilt angle of projector.
• The left and right (horizontal) keystone correction is not available.
24