NEC NP-VE281 User Manual page 70

[3D]
[VE280X/VE280]
[VE281X/VE281/VE282X/VE282]
Selecting input connected to a source of 3D images [COMPUTER] (VE280X/VE280)/[COMPUTER/HDMI]
(VE281X/VE281/VE282X/VE282)
[3D]
This function switches the 3D mode between ON and OFF for each input.
ON ������������������������� Turns on the 3D mode for the selected input�
NOTE:
To confirm that the supported 3D signal is accepted, use either way of the following:
- Make sure that [3D] is displayed in the top right of the screen after the source is selected.
- Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.
OFF ������������������������ Turns off the 3D mode for the selected input�
[L/R INVERT]
Change the setting if you have difficulty seeing 3D images.
NON-INVERT ����������������������Normal setting�
INVERT �������������������������������Changes the order of displaying the images for left eye and right eye�
61
5. Using On-Screen Menu