NEC NP-VE281 User Manual page 69

Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer's image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in
combination of the AUTO POWER OFF function.
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN connector
- when a Sync on Green RGB signal or composite sync signal is applied
• To enable the AUTO POWER ON (COMP.) after turning off the projector, wait 3 seconds and input a computer signal.
If a computer signal is still present when the projector is turned off, the AUTO POWER ON (COMP.) will not work and the projector
remains in standby mode.
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min., 30min., 1 hour) if there is no signal received by any input or if no operation is performed.
Selecting Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST �����������������������������������Sets the projector to default to the previous or last active input each time the projector is turned on�
AUTO ����������������������������������Searches for an active source in order of COMPUTER → (HDMI on VE281X/VE281/VE282X/VE282)
COMPUTER ������������������������Displays the computer signal from the COMPUTER IN connector every time the projector is turned
HDMI
(VE281X/VE281/VE282X/VE282) �����Displays the digital source from the HDMI IN connector every time the projector is turned on�
VIDEO ���������������������������������Displays the Video source from the VIDEO IN connector every time the projector is turned on�
→ VIDEO and displays the first found source.
on�
60
5. Using On-Screen Menu