Adjusting With The Remote Control - NEC PH1202HL User Manual

Adjusting with the remote control

1. Hold the CTL button and press the ECO/L-SHIFT button.
The [LENS SHIFT] screen will be displayed.
2. Press the ▼▲◀ or ▶ button.
Use the ▼▲◀▶ buttons to move the projected image.
TIP:
• The figure below shows the lens shift ranges (projection mode: desktop/front) of lens units NP-9LS08ZM1, NP-9LS12ZM1, NP-
9LS13ZM1, NP-9LS16ZM1, and NP-9LS20ZM1. For NP-9LS40ZM1 check page 158.
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
11%H
50%V
20%V
100%V
20%V
50%V
100%H
11%H
23
2. Projecting an Image (Basic Operation)
11%H
Width of projected image
20%V
Height of projected image
20%V
11%H