Turning Off The Projector - NEC NP-VE281 User Manual

Turning off the Projector

To turn off the projector:
1. First, press the
cabinet or the POWER OFF button on the remote
control.
The [POWER OFF / ARE YOU SURE? /CARBON
SAVINGS- SESSION X.XXX[g-CO2]] message will appear.
2. Secondly, press the
projector cabinet, or the ENTER button or the POWER
OFF button on the remote control.
The lamp will turn off and the projector will go into standby
mode. When in standby mode, the POWER indicator will
light orange and the STATUS indicator will light green when
[NORMAL] is selected for [STANDBY MODE].
3. Finally, unplug the power cord.
The POWER indicator will go out.
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during normal
projector operation or during cooling fan operation. Use caution when picking up the projector.
NOTE:
• Do not turn off the power for 60 seconds immediately after turning it on and displaying an image.
• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing
the menu. Doing so can cause loss of adjustments and settings.
(POWER) button on the projector
(POWER) button on the
3. Projecting an Image (Basic Operation)
Power On
Steady green light
26
Standby
Steady orange light