NEC NP-VE281 User Manual page 50

2800-lumen high-brightness mobile projector
Hide thumbs Also See for NP-VE281:
Table of Contents

Advertisement

Selecting input connected to a source of 3D images [COMPUTER] (VE280X/VE280)/[COMPUTER/HDMI]
(VE281X/VE281/VE282X/VE282)
This function switches the 3D mode between ON and OFF for each input.
NOTE:
To confirm that the supported 3D signal is accepted, use either way of the following:
- Make sure that [3D] is displayed in the top right of the screen after the source is selected.
- Display [INFO.] → [SOURCE (2)] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.
NOTE:
• The maximum distance for viewing 3D images is 15 m/590 inches from the lens surface under the following restrictions:
- Brightness on the projector: 2000 lumens or greater
- Screen gain: 1
- Viewing position: Facing straight towards the screen center
- Outside light: None
- LCD shutter eyeglasses: Using the optional 3D Goggles (NP02GL)
• If 3D content is played back on your computer and the performance is poor it may be caused by the CPU or graphics chip. In this
case you may have difficulty seeing the 3D images as they were intended. Check to see if your computer meets the requirements
provided in your user's manual included with your 3D content.
• The DLP
Link compatible LCD shutter eyeglasses allow you to view 3D images by receiving synch signals, which are included in
®
left eye and right eye images, reflected from the screen. Depending on environments or conditions such as the ambient brightness,
screen size or viewing distance, the LCD shutter eyeglasses may fail to receive synch signals, causing poor 3D images.
• When the 3D mode is enabled, the Keystone correction range will be narrower.
• When the 3D mode is enabled, the following settings are invalid.
[WALL COLOR], [PRESET]
• Refer to the [SOURCE] screen under the [INFO.] menu for information on whether the input signal is 3D compatible.
• Signals other than those listed in "Compatible Input Signal List" on page 74 will be out of range or will be displayed in 2D.
41
4. Convenient Features

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np-ve281xVe280xVe281xVe282xVe280Ve281 ... Show all

Table of Contents