Reassembly Notes
Caution
When reinstalling the Pick Roller, be careful not to damage the springs.
Power Supply Board (PL 9.1.13)
1.
Remove the Duplex Guide Plate from the printer (page 8-36, Steps 1 through 8).
Slide the Tray 2 Paper Out Actuator (item 1) to the left ➀ until the end is free of
2.
the retainer clip, then lift up ➁ to remove it from the printer.
Right
8-42
1
1
Left
Phaser 3450 Laser Printer Service Manual
2
s3450-178