9.
Pull out on the top of the bearing retainer for the Feed Roller Shaft on the right
side of the printer. Pull out to free the bearing from the chassis, then rotate the
bearing to the rear and remove it from the shaft.
10.
Remove 4 screws securing the Paper Pick Assembly, slide the assembly to the
right side of the printer, lift the left end and slide the assembly up and out to the
left side of the printer.
8-40
2
1
Feed Roller
1.
1
Phaser 3450 Laser Printer Service Manual
s3450-175
Pick Up Roller
2.
s3450-176