Xerox 3450B - Phaser B/W Laser Printer Service Manual page 125

3.
Using a small flat bladed screwdriver, release the latch hook on each side of the
Intermediate Output Tray.
4.
Remove the Intermediate Output Tray (item 1) towards the front of the printer.
5.
Remove 3 screws securing the Laser Assembly to the printer chassis and lift the
Laser sufficiently to access the harness.
Caution
Be careful not to touch the window on the underside of the Laser Assembly.
6.
Carefully peel back the foam pad securing the laser harness to the bottom of the
Laser Assembly and disconnect the 2 harness connectors from the Laser.
Note
If the foam pad is damaged during removal, it is not critical to unit
performance.
8-28
1
Phaser 3450 Laser Printer Service Manual
s3450-057
s3450-058