Voice Traffic And Vvid - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Chapter 3 Configuring Ethernet Switching
Step 3

Voice Traffic and VVID

OL-2031-02
Configuring Ethernet Ports to Support IP Phones and a Daisy-Chained Workstation
Task
Enter the privileged EXEC mode. A preset
password may be required to enter this
mode.
Enter global configuration mode.
Enter the interface configuration mode and
the port to be configured (for example,
interface fa5/1).
Configure the port as access and assign a
data VLAN.
Configure the voice port with a VVID that
will be used exclusively for voice traffic.
Verify the switch port configuration and
save it.
Verify the port configuration you just
entered.
Save the current configuration in Flash
memory.
The Catalyst 4224 can automatically configure voice VLAN. With the
automatically configured voice VLAN feature, network administrators can
segment phones into separate logical networks even though the data and voice
infrastructure is physically the same. The voice VLAN feature places the phones
into their own VLANs without the need for end-user intervention. A user can plug
the phone into the switch, and the switch provides the phone with the necessary
VLAN information.
Catalyst 4224 Access Gateway Switch Software Configuration Guide
Command
enable
configure terminal
interface interface
switchport access vlan
vlan-id
switchport voice vlan vlan-id
show run interface interface
write memory
3-5