Epson U375P - TM B/W Dot-matrix Printer Information Manual page 79

Command Name Function
GS c Print counter Stores a serial
counter value in the
print buffer and
increments or
decrements the
counter value.
GS f Select font Selects a font for the
for HRI HRI characters used
characters when printing a bar
code.
GS h Set bar code Sets the height of a
height bar code.
GS k Print bar Selects a bar code
code system and prints
the bar code.
GS k Print bar Selects a bar code
code system and prints
the bar code.
GS r Transmit status Transmits a specified
status.
GS w Set bar code Sets the horizontal
width size of the bar code.
GS z 0 Set on-line Sets the on-line
recovery wait recovery wait time.
time
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
TM-
295