Epson U375P - TM B/W Dot-matrix Printer Information Manual page 12

FF
[Name] Print and eject cut sheet (in standard mode)
1
Print and return to standard mode (in page mode)
2
[Format] ASCII
Hex
Decimal
In standard mode, FF prints the data in the print buffer and ejects the cut sheet (slip or validation
paper). This command is enabled only when a cut sheet is selected for printing. When the eject
length has been set by ESC C, the printer ejects the cut sheet based on the current eject length
regardless of the cut-sheet paper sensor state. Otherwise, the printer ejects the cut sheet completely.
Paper from the paper roll is not ejected, even if it is also selected.
After cut-sheet ejection, the paper roll is selected for printing. The cut sheet is ejected in the forward
direction only.
In page mode, FF prints the data in the print buffer collectively and returns to standard mode. The
buffer data is deleted after being printed, but the paper is not ejected.
Program Example <standard mode>
PRINT #1, CHR$(&H1B);"c0";CHR$(4);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HC);
Program Example <page mode>
PRINT #1, CHR$(&H1B);"L";
PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);
CHR$(0);CHR$(30);CHR$(0);CHR$(30);CHR$(0);
PRINT #1, CHR$(&H1B);"T";CHR$(0);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, "CCCCC"; CHR$(&HC);
Rev. A
FF
0C
12
Select slip
Select page mode
Store characters for printing
Store characters for printing
Batch print
TM–U375/U375P Information Manual
Print Sample <standard mode>
AAAAA
BBBBB
The paper is completely ejected.
Print Sample <page mode>
AAAAA
BBBBB
CCCCC
Command Descriptions 1-5