Epson U375P - TM B/W Dot-matrix Printer Information Manual page 52

Program Example
PRINT #1, CHR$(&H1D);"I";CHR$(1);
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII
Hex
Decimal
[Range] m = 0, 1, 48, 49
0 t1 255
0 t2 255
ESC p m t1 t2 sends a pulse (on time= t1
pin. When m=0 or 48, the pulse is sent to drawer kick-out connector pin 2; when m=1 or 49, the pulse
is sent to drawer kick-out connector pin 5.
Program Example
PRINT #1, CHR$(&H1B);"p";CHR$(0);CHR$(25);CHR$(250);
ESC = n
[Name] Select peripheral device
[Format] ASCII
Hex
Decimal
[Range] 1 n 3
ESC = n selects the device to which the host computer sends data, based on the value of n as follows:
When the printer is disabled (n=2), it ignores all received data with the exception of the DLE ENQ 1
and DLE ENQ 2 commands. The default setting varies according to the DIP switch settings.
n Peripheral Device Status
1 Only printer selected.
2 Only customer display selected.
3 Both printer and customer display selected.
Rev. A
Transmits printer ID
ESC p m
m
1B 70
27 112 m
2 msec / off time= t2 2 msec) to the specified connector
ESC = n
1B 3D n
27 61 n
TM–U375/U375P Information Manual
t1 t2
t1 t2
t1 t2
Command Descriptions 1-45