Epson U375P - TM B/W Dot-matrix Printer Information Manual page 30

Bit Off/On Hex Decimal
Off 00 0
3
On 08 8
4-7 — — —
PRINT #1, CHR$(&H1B);"c1";CHR$(1);
PRINT #1, CHR$(&H1B);"3";CHR$(12);
PRINT #1, CHR$(&H1B);"c1";CHR$(4);
PRINT #1, CHR$(&H1B);"3";CHR$(24);
ESC f t1 t2
[Name] Set cut sheet wait time
[Format] ASCII
Hex
Decimal
t1 15
[Range] 0
0 t2 64
ESC f t1 t2 sets the time that the printer waits for cut sheet (slip or validation paper) to be inserted to
t1 1 minutes, and the time from insertion of the sheet to the start of printing to t2
When t1=0, the sheet waiting time is not set and the printer continues waiting for a sheet to be
inserted. The default for the sheet waiting time is not set, and the start operation time is set to 1
second (t1=0, t2=10). This setting alone, however, does not cause the printer to immediately start
waiting for a sheet to be inserted. The setting becomes effective when ESC c 0 is used. DLE ENQ is
used to cancel the sheet waiting state.
Program Example
PRINT #1, CHR$(&H1B);"f";CHR$(15);CHR$(20);
PRINT #1, CHR$(&H1B);"c0";CHR$(4);
PRINT #1, "AAAAA"; CHR$(&HA);
Rev. A
Function
Validation paper disabled.
Validation paper enabled.
Undefined.
Program Example
Select paper roll
Set line spacing for paper roll
Select slip paper
Set line spacing for slip paper
ESC f
1B 66
27 102
Select slip
TM–U375/U375P Information Manual
t1 t2
t1 t2
t1 t2
Command Descriptions 1-23
0.1 seconds.