Epson U375P - TM B/W Dot-matrix Printer Information Manual page 78

Command Name Function
GS L Set left margin Sets the left margin
using specified
values.
GS P Set horizontal Sets the horizontal
and vertical and vertical motion
motion units units.
GS V Select cut Cuts the specified
mode and cut paper.
paper
GS V Select cut Advances the
mode and cut specified paper to
paper the cut position and
performs the cut.
GS W Set printing Sets the printing area
area width width to a defined
area.
GS \ Set relative Moves the vertical
vertical print print starting position
position in in page mode to a
page mode specified distance
from the current
position.
GS ^ Execute Executes a macro.
macro
GS a Enable/ Selects a status for
disable ASB transmission.
Automatic
Status Back
(ASB)
GS b Turn Turns smoothing
smoothing mode on or off.
mode on/off
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
TM-
295