Epson U375P - TM B/W Dot-matrix Printer Information Manual page 76

Command Name Function
FS a 2 Eject check Ejects the check
paper paper.
FS b Request Retransmits the
retransmission previous check
of check paper reading
paper results.
reading result
FS c MICR Cleans the MICR
mechanism mechanism.
cleaning
GS ENQ Transmit real- Transmits the status
time printer of the printer in real
status time.
GS FF Print and Prints the data in the
eject label print buffer and
ejects the label.
GS ! Select Selects the
character size character width and
height.
GS $ Set absolute Sets the absolute
vertical print vertical print starting
position in position in page
page mode mode.
GS Define Defines a
downloaded downloaded bit
bit image image using a
specified number of
dots.
GS / Print Prints a downloaded
downloaded bit image using a
bit image specified mode.
GS : Start/end Starts or ends a
macro macro definition.
definition
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
O O
O O
O O
TM-
295