Epson U375P - TM B/W Dot-matrix Printer Information Manual page 73

Command Name Function
ESC c 3 Select paper Selects paper
sensor(s) to sensor(s) to output
output paper- paper-end signals.
end signals
ESC c 4 Select paper Selects the paper
sensor(s) to sensor that stops
stop printing printing when the
paper runs out.
ESC c 5 Enable/disable Enables or disables
panel buttons the panel buttons.
ESC c 6 Enable/disable Enables or disables
on-line button the on-line button.
ESC d Print and Prints the data in the
feed n lines print buffer and
feeds n lines.
ESC e Print and Prints the data in the
reverse feed print buffer and
n lines feeds n lines in the
reverse direction.
ESC f Set cut sheet Sets the time that the
wait time printer waits for cut
sheet to be inserted
and the time from
insertion of the sheet
until printing starts.
ESC i Partial cut Executes a partial
(one point cut of the paper with
left uncut) one point left uncut.
ESC m Partial cut Executes a partial
(three points cut of the paper with
left uncut) three points left
uncut.
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
O O O
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
O O O O O O O O
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
O O
TM-
295
O