Epson U375P - TM B/W Dot-matrix Printer Information Manual page 32

n n
ESC $ sets the print starting position to [(
L H
inches from the left margin.
n n
ESC \ moves the print starting position to [(
L H
unit)] inches from the current position. Use the complement of N for setting N pitch movement to the
left: – N pitch = 65536 – N, where N = (
When standard mode is selected, the horizontal motion unit set by GS P is used. When page mode is
selected, the horizontal or vertical motion unit set by GS P is used for the print direction set by ESC T.
Program Example
PRINT #1, CHR$(&H1D);"P";CHR$(160);CHR$(144);
PRINT #1, "ABCD";
PRINT #1, CHR$(&H1B);"$";CHR$(80);CHR$(0);
PRINT #1, "EFGH"; CHR$(&HA);
PRINT #1, "ABCD";
PRINT #1, CHR$(&H1B);CHR$(&H5C);CHR$(80);CHR$(0);
PRINT #1, "EFGH"; CHR$(&HA);
ESC a n
[Name] Select justification
[Format] ASCII
Hex
Decimal
[Range] 0 n
48 n 50
ESC a n aligns all the data in one line to a specified position. Left justification is selected when n=0 or
48, centering is selected when n=1 or 49, and right justification is selected when n=2 or 50. The default
setting is left justification (n=0). This command is enabled only at the beginning of a line in standard
mode. If this command is entered in page mode, an internal flag is activated and the command is
enabled when the printer returns to standard mode.
Program Example
FOR n=0 TO 2
PRINT #1, CHR$(&H1B);"a";CHR$(n);
PRINT #1, "ABC"; CHR$(&HA);
PRINT #1, "ABCD"; CHR$(&HA);
PRINT #1, "ABCDE"; CHR$(&HA);
NEXT n
Rev. A
n n
+
L
n
L
n n
+ 256).
L H
ESC a n
1B 61 n
27 97 n
TM–U375/U375P Information Manual
256) (horizontal or vertical motion unit)]
H
n
+ 256) (horizontal or vertical motion
H
Print Sample
80/160 inch
ABCD EFGH
ABCD
80/160 inch
Print Sample
ABC
ABCD ESC a 0
ABCDE
ABC
ABCD
ABCDE
Command Descriptions 1-25
EFGH
ESC a 1
ABC
ESC a 2 ABCD
ABCDE