Epson U375P - TM B/W Dot-matrix Printer Information Manual page 43

Drawer kick-out connector status (n=2, 50)
Bit Off/On Hex Decimal
Off 00 0
0
On 01 1
1-3 — — —
4 Off 00 0
5, 6 — — —
7 Off 00 0
Cut-sheet (slip or validation paper) status (n=3, 51)
Transmits the values 00H - 0FH, indicating the remaining printable area as follows:
Cut- Sheet Status
Number of
Remaining Dots
Hex
0 - 8 00H
9 - 17 01H
18 - 26 02H
• •
• •
• •
117 - 125 0DH
126 - 134 0EH
135 and up 0FH
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII
Hex
Decimal
[Range] 1 n
DLE EOT n transmits the specified status in real time. This command is executed even when the
printer is off-line, the print buffer is full, or an error occurs. n indicates the status function as follows:
n
Function
1 Transmit printer status
2 Transmit off-line status
3 Transmit error status
4 Transmit paper roll sensor status
1-36 Command Descriptions
Status
Drawer kick-out connector pin 3 is LOW.
Drawer kick-out connector pin 3 is HIGH.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Decimal
0
1
2
•
•
•
13
14
15
DLE EOT n
10 04 n
16 4 n
Rev. A