Epson U375P - TM B/W Dot-matrix Printer Information Manual page 50

Commands used with the horizontal and vertical motion units (1/x and 1/y) in page mode (either x
or y can be used, depending on the print direction set with ESC T): ESC SP, ESC $, ESC 3, ESC J,
ESC W, and ESC \.
Program Example
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);
PRINT #1, CHR$(&H1B);"3";CHR$(30);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(90);
PRINT #1, CHR$(&H1B);"3";CHR$(30);
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, "DDDDD"; CHR$(&HA);
PRINT #1, "EEEEE"; CHR$(&HA);
ESC @
[Name] Initialize printer
[Format] ASCII
Hex
Decimal
ESC @ initializes the printer. All settings, including character font and line spacing settings, are
canceled. The data in the print buffer is cleared, and the printer mode is reset to the mode that was in
effect when the power was turned on. The DIP switch settings are not checked again, and the data in
the receive buffer is not cleared.
Program Example
PRINT #1, CHR$(&H1B);"!";CHR$(56);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"@";
PRINT #1, "BBBBB"; CHR$(&HA);
GS E n
[Name] Select head control method
[Format] ASCII
Hex
Decimal
[Range] 0 n 255
Rev. A
Set line spacing
Set line spacing
ESC @
1B 40
27 64
GS E n
1D 45 n
29 69 n
TM–U375/U375P Information Manual
Print Sample
AAAAA
BBBBB 30/180-inch line spacing
CCCCC
30/90-inch line spacing
DDDDD
EEEEE
Print Sample
AAAAA
BBBBB
All settings are canceled after ESC @ is executed
Command Descriptions 1-43