Dell OptiPlex E1 Reference And Installation Manual page 66

The Configure Unlisted Card dialog box appears with blank fields.
For example, if you click the box beneath IRQ, the button changes to Add Inter-
rupt. When you click this button, a Specify dialog box (in this case, Specify
Interrupt) appears. Figure 3-7 shows the Configure Unlisted Card dialog box with
the Specify Interrupt dialog box opened.
)LJXUH  6SHFLI\ ,QWHUUXSW 'LDORJ %R[
If you are providing a value for the interrupt request (IRQ) or direct memory
access (DMA) resource, click the down arrow beneath Available Resources. A
smaller Specify list box appears (see Figure 3-8). Click the value you want to
assign to the resource. Then click OK.
)LJXUH  6SHFLI\ ,QWHUUXSW /LVW %R[
If none of the values for the DMA or IRQ resources match the allowable values
for your unlisted card (as indicated in the card's documentation), select one of the
available values offered by the utility and click OK.
3-10 Dell OptiPlex E1 Managed PC Reference and Installation Guide