Removing And Replacing Front-Panel Inserts - Dell OptiPlex E1 Reference And Installation Manual

7-8 Dell OptiPlex E1 Managed PC Reference and Installation Guide
If your system came with an EIDE CD-ROM or tape drive, use the spare connec-
tor on the existing interface cable. Otherwise, use the EIDE interface cable
provided in the drive kit.
DC power
cable
interface
connector
)LJXUH  $WWDFKLQJ &DEOHV WR D 'ULYH LQ WKH ,QFK 'ULYH
%D\
For a diskette drive or non-EIDE tape drive , connect the cable from the drive to
the interface connector labeled "DSKT" on the system board.
For a drive that comes with its own controller card , connect the other end of the
interface cable to the controller card.
Check all cable connections. Fold cables out of the way to provide airflow for the
fan and cooling vents.
See "Removing and Replacing Front-Panel Inserts" found earlier in this chapter.
power input connector
diskette/tape drive
interface cable