Responding To Error Messages - Dell OptiPlex E1 Reference And Installation Manual

messages
Configuration Manager, B-6
ICU, B-1
invalid configuration information, 2-1,
6-8
prompt to enter the System Setup
program, 2-1

responding to error messages, 2-22

microprocessor
fan connector, 6-1
jumper settings for speed, 5-9
SEC cartridge connector, 6-1
speeds, toggling between, 2-9
type supported, 1-1
mouse connector, 4-2, 5-7, 6-1
Mouse Port category, 2-9
MS-DOS network driver, 4-8
network drivers
MS-DOS, 4-8
Windows 95, 4-5
Windows for Workgroups, 4-7
Windows NT 3.5x, 4-4
Windows NT 4.0, 4-3
Network Interface Controller category,
2-9
network interface controller. See NIC
NIC
about, 4-2
configuring, 4-3
connector, 4-2, 5-7, 6-1
link integrity, 4-2
MS-DOS driver, 4-8
network cable requirements, 4-2
Windows 95 driver, 4-5
Windows for Workgroups driver, 4-7
Windows NT 3.5x driver, 4-4
Windows NT 4.0 driver, 4-3
notational conventions, xii
notes, xii
online documentation, 1-13
padlock, 1-8, 5-2
padlock ring, 5-7
parallel port
compatibility, 2-10
connector, 4-2, 5-7, 6-1
Parallel Port category, 2-10
Parallel Port Mode category, 2-10
partitioning
EIDE hard-disk drives, 7-13
Password Status category, 2-12
password. See setup password; system
password
PC Speaker category, 2-11
PCI expansion cards
See also expansion cards
about, 6-2
configuration, 3-1
connectors, 6-3
locking and unlocking, 3-15
physical formatting, 7-13
PIIX4e INF Update Installer, 1-12
Plug and Play expansion cards
See also expansion cards
configuration, 3-1
ports
adding expansion cards with ports,
2-10
autoconfiguration, 2-10
designations, 2-10
illustrated, 4-2, 5-7
power
AC power receptacle, 5-7
power input connectors, 6-1
switch, 1-9
time-out periods, 2-15
Index 5