Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Disconnect the speaker cable from the system board.
5.
Free the cable from the cable tie that is attached to the chassis.
6.
Remove the screw that secures the speaker to the inside of the chassis (1), and then remove the
speaker by sliding it toward the bottom of the chassis and out of the retaining clips (2).
To install the speaker, reverse the removal procedure.
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
58).
57).
56).
Speaker
75