4.
Open both latches of the memory module socket (1), and insert the memory module into the socket
(2).
NOTE:
the tab on the memory socket.
5.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
6.
Repeat steps 4 and 5 for any additional modules that you want to install.
NOTE:
The computer automatically recognizes the additional memory when the computer is turned
on.
100 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
A memory module can be installed in only one way. Match the notch on the module with