Copying To Multiple Computers - HP dx7400 - Microtower PC Service & Reference Manual

3. Turn on the computer.
4. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press F10
5. If you are using a diskette, insert it now.
6. Click File > Replicated Setup > Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette or USB flash media device.
7. Turn off the computer to be configured and insert the configuration diskette or USB flash media
device.
8. Turn on the computer to be configured.
9. As soon as the computer is turned on, press
Computer Setup. Press
10. Click File > Replicated Setup > Restore from Removable Media, and follow the instructions on
the screen.
11. Restart the computer when the configuration is complete.

Copying to Multiple Computers

CAUTION:
target computers are not the same model. For example, do not copy the setup configuration from a
dc7xxx PC to a dx7xxx PC.
This method takes a little longer to prepare the configuration diskette or USB flash media device, but
copying the configuration to target computers is significantly faster.
NOTE: A bootable diskette is required for this procedure or to create a bootable USB flash media
device. If Windows XP is not available to use to create a bootable diskette, use the method for copying
to a single computer instead (see
1. Create a bootable diskette or USB flash media device. See
on page 32
CAUTION:
order in the Computer Setup (F10) Utility lists the USB device before the hard drive, the computer
can be booted from a USB flash media device. Otherwise, a bootable diskette must be used.
2. Select a setup configuration to copy. Turn off the computer. If you are in Windows, click Start >
Shut Down > Shut Down.
3. If you are using a USB flash media device, insert it now.
4. Turn on the computer.
5. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press F10
Enter to bypass the title screen, if necessary.
If you do not press F10
when the monitor light turns green to access the utility.
Enter to bypass the title screen, if necessary.
A setup configuration is model-specific. File system corruption may result if source and
Copying to Single Computer on page
or Unsupported USB Flash Media Device on page
Not all computers can be booted from a USB flash media device. If the default boot
Enter to bypass the title screen, if necessary.
If you do not press F10
when the monitor light turns green to access the utility.
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again
F10 when the monitor light turns green to enter
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again
30).
Supported USB Flash Media Device
33.
Replicating the Setup 31