Epson SureColor SC-T3000 User Manual page 110

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Item
Restore Settings
Printer Status Firmware Version
Option Status
Show Total Prints
Print Status Sheet
Network Setup IP Address Setting
Print Status Sheet
Restore Settings
Using the Control Panel Menu
Description
Store Held On
Job
Off
Yes
No
xxxxxxx,x.xx,xxxx
Lists the optional accessories currently connected to the printer and
available for use.
2
XXXXXXX m
2
(XXXXXX ft )
Press the Z button to print a list of current printer settings.
Choose this option to view settings at a glance.
Auto
Panel
Press the Z button to print a list of network settings. Choose this option
to view network settings at a glance.
Yes
No
110
This item is available when an optional hard disk
unit is installed. If On is selected, print jobs that
require a paper type, source, or output paper size
(width) that differs from those currently selected
with the printer will be saved as held jobs; select
Off to disable this feature.
If Off is selected, an error will be displayed and will
printing will stop if the source selected for the print
job does not match that selected with the printer.
If On is selected, printing will not stop if an error
occurs; instead, jobs with non-matching settings
will be saved to the hard disk unit as held jobs. Held
jobs can be printed from the Print Queues menu
after the printer has been readied by, for example,
loading the correct type of paper.
"The Purpose of the Hard Disk Unit" on
U
page 55
Select Yes to restore all printer settings to default
values.
You can see the firmware version.
View the total area printed (six-figure maximum).
Select whether to use DHCP to set the IP address
(Auto), or to set the address manually (Panel).
Choose Panel to enter the IP address, Subnet
Mask, and Default Gateway. Contact your system
administrator for detailed information.
Select Yes to restore all network settings to default
values.