Epson SureColor SC-T3000 User Manual page 42

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Note:
The tensioner supplied with the auto take-up reel
unit is used with some types of paper. Slacken the
paper and insert the tensioner near the center of the
paper as shown. See the following section for
information on paper that requires the tensioner.
"Epson Special Media Table" on page 139
U
H
Set the Auto switch to Forward.
Taking Up the Paper Printable Side In
For information on installing the roll core, see the Setup
Guide for the optional auto take-up reel unit.
Basic Operations
Buttons that are used in the following settings
A
Set the auto take-up reel unit Auto switch to Off.
Plug the power cord into an outlet and confirm
that the power lamp lights.
B
Turn on the printer by pressing the P button.
C
Check that the roll paper is correctly loaded in the
printer.
D
Press the ) button in the control panel. Keep
the d button pressed until the end of the roll
reaches the roll core.
42