Removing Poster Board - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide

Removing Poster Board

This section describes how to remove poster board
when printing is complete.
Note:
To remove paper that was loaded but not used, press the
( button and select Remove Paper.
Buttons that are used in the following settings
A
Confirm that Paper Eject is displayed in the
control panel.
Keeping a hand on the poster board to prevent it
falling from the printer, press the Z button.
Basic Operations
B
Pull the poster board forward as shown in the
on-screen instructions.
After removing the poster board, press the Z
button.
c
Important:
If poster board will not be used in the next
print job, lower all the poster board supports.
Leaving the supports raised may cause paper
to jam.
To lower the supports, grasp them as shown,
pull them diagonally downward, and then
release.
34