Cutting The Roll Paper - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Pull the paper straight through until the leading
edge of the paper reaches the lines on the poster
board supports as shown.
Note:
Do not touch the paper where it will be printed.
After loading the roll paper, rotate the roll paper
adapters as shown to feed the paper through.
L
Lower the roll lock lever.
Basic Operations
M
Following the on-screen instructions, press the
Z button.
The paper will be fed into the printer.
N
Close the roll paper cover.
O
Check the media type.
If a barcode giving information on the paper is
printed on the roll
The printer will automatically read the barcode
as the paper is fed; no message is displayed. The
printer is ready to print when Ready is displayed.
If a barcode giving information on the paper is
not printed on the roll
The printer will display the Paper Type and Roll
Paper Remaining settings for the paper currently
selected with the printer. To print at current
settings, press the d/u buttons to highlight Keep
Settings Above and press the Z button. To
change settings, highlight Change Settings and
press the Z button. U
Changing Media Settings" on page 35

Cutting the roll paper

Either of the following two methods can be used to cut
roll paper after printing.
❏ Auto Cut:
Cut the roll paper after printing each page
automatically using the built-in cutter.
26
"Viewing and