Epson AcuLaser C2900N User Manual page 86

Storing Print Jobs
In the print driver, you can specify a setting that enables you to store print jobs in temporary memory.
For example, select a job type other than Normal Print in the Paper / Output tab of the PCL 6 driver.
The job will be stored in temporary memory until you request to print it from the operator panel or
turn off the printer.
Printing the Stored Jobs
Once jobs are stored, you can use the operator panel to specify printing. Select the job type you are
using from Secure Print and Sample Print. Then, select your user ID from a list. Secure Print requires
the password you specified in the driver when you sent the job.
To print the stored documents, use the procedure below.
1. Press the button.
2. Select Secure Print or Sample Print, and then press the
3. Select your user ID, and then press the
4. Select the document you want to print, and then press the
5. Select the desired job type, and then press the
6. Select Use PC Settings or Input Number, and then press the
Note:
When you select Input Number, you can specify the number of copies to be printed before pressing
the button.
The stored document will be printed.
Specifying Your Password on the Operator Panel (Secure Print)
When you select your user ID for Secure Print, the following prompt appears:
[_ ]
Use the buttons on the operator panel to enter the numeric password you specified in the print driver.
The password you entered will be displayed as asterisks (*******) to ensure confidentiality.
Epson AcuLaser C2900 Series
button.
button.
button.
button.
User's Guide
button.
Printing Basics 86