Resetting The Counter Of The Fuser Unit; Replacing The Feed Roll Unit - Epson AcuLaser C2900N User Manual

4. Close the front cover.
5. Reconnect the power cord to the power connector and turn on the printer.

Resetting the Counter of the Fuser Unit

After replacing the fuser unit, use the operator panel to reset the counter of the fuser unit.
1. Press the (Menu) button.
2. Select Admin Menu, and then press the
3. Select Maintenance Mode, and then press the
4. Select Reset Fuser, and then press the
5. Ensure that Are You Sure? appears, and then press the

Replacing the Feed Roll Unit

This section describes how to replace the feed roll unit in the standard 250-sheet tray. Regularly
replacing the feed roll helps ensure the best quality output.
Epson feed rolls are available only through Epson.
It is recommended that you use Epson feed rolls for your printer. Epson does not provide warranty
coverage for problems caused by using accessories, parts, or components not supplied by Epson.
Epson AcuLaser C2900 Series
button.
button.
button.
button.
User's Guide
Maintenance 219