Printing And Checking The Printer Settings Page; Installing Print Driver On Computers Running Windows; Identifying Print Driver Pre-Install Status (For Network Connection Setup) - Epson AcuLaser C2900N User Manual

2. Enter cmd, and then click OK.
A black window is displayed.
3. Enter ping xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of your printer), and then press the
Enter key.
4. Reply from the IP address denotes printer is active on the network.
See Also:
"Printing and Checking the Printer Settings Page" on page 46

Printing and Checking the Printer Settings Page

Print the Printer Settings page and check your printer's IP address by using the operator panel.
1. On the operator panel, press the
2. Select Report/List, and then press the
3. Select Printer Settings, and then press the
The Printer Settings page is printed.
4. Confirm the IP address next to IP Address under Network (Wired) on the Printer Settings page.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then
print the Printer Settings page again.
If the IP address is not resolved automatically, see "Assigning an IP Address (for IPv4 Mode)" on
page 43.

Installing Print Driver on Computers Running Windows

Identifying Print Driver Pre-install Status (For Network Connection Setup)

Before installing the print driver on your computer, print the Printer Settings page to check the IP
address of your printer.
Epson AcuLaser C2900 Series
(Menu) button.
button.
button.
User's Guide
Network Basics 46