Protrudent/Bumpy Paper; Adjusting Color Registration; Performing Auto Adjust - Epson AcuLaser C2900N User Manual

Protrudent/Bumpy Paper

Problem
Printed surface got protrudent/bumpy.

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after
moving it to a new location.

Performing Auto Adjust

Auto Adjust allows you to correct the color registration automatically.
The Operator Panel
1. Press the (Menu) button.
2. Select Admin Menu, and then press the
3. Select Maintenance Mode, and then press the
4. Select Adjust ColorRegi, and then press the
Action
Clean up the fuser unit.
1. Load one sheet of paper on the SSF, and then print a solid image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
If the problem persists, contact the Epson local representative office or an
authorised dealer.
button.
Epson AcuLaser C2900 Series
button.
button.
User's Guide
Troubleshooting 182