Epson EPL-6200 Reference Manual page 78

Different printer settings overlay data
The overlay data is made with the current printer settings such as
Resolution: 600 dpi. If you want to make the same overlay with
different printer settings such as 1200 dpi, follow the instructions
below.
1. Re-access the printer driver as described in step 2 in "Creating
an overlay" on page 58.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer as in step 12 in "Creating an overlay" on page 58.
This setting is available only for Form Name data.
Resetting the photoconductor counter
After replacing a photoconductor unit, reset the photoconductor
counter by using the printer driver. When you are finished
installing a new a photoconductor unit, see "Resetting the
photoconductor counter" on page 61.
Resetting the photoconductor counter
1. Click the Optional Settings tab, and then click Printer
Settings. The Printer Settings dialog box appears.
2. Click Reset OPC Level. The photoconductor clear dialog box
appears.
Using the Printer Driver For Windows
3
3
3
3
3
3
3
3
3
3
3
3
61