Macintosh Users - Epson EPL-6200 Reference Manual

Macintosh Users

Problems printing PostScript documents
The printer does not print correctly in the PostScript mode.
Cause
The printer's emulation mode
setting is incorrect.
The printer's emulation mode
setting for the interface that
you are using is incorrect.
What to do
The emulation mode setting is set to
Auto by default, so that it can
automatically determine the encoding
used in the received print job data and
select the appropriate emulation mode.
However, there are situations where the
printer cannot select the correct
emulation mode. In this case, it must be
set manually to PS3.
Set the emulation mode using the
Remote Control Panel utility. For
details, see "Choosing printer
emulation" on page 262.
The emulation mode can be set
individually for each interface which
receives print job data. Set the emulation
mode for the interface you are using to
PS3.
Set the emulation mode using the
Remote Control Panel utility. For
details, see "Choosing printer
emulation" on page 262.
Troubleshooting
11
11
11
11
11
11
11
11
11
11
11
11
405