Epson EPL-6200 Reference Manual page 60

Installing the printer driver for the network interface
Follow the steps below to install the PostScript printer driver for
the network interface:
Note:
To connect using a network interface, you must install the optional
interface card into the printer.
You must have at least 6 MB of free space on your hard disk drive
to install the printer driver.
1. Insert the CD-ROM that shipped with your printer into the
CD-ROM drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Select Network
printer server, and then click Next.
5. Enter the name of the printer or select the printer from the list
of available printers on the network, and then click OK.
6. Click OK once the following message appears.
"The server on which the XXX printer resides does not have the
correct printer driver installed."
7. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\AdobePS\english\winnt4\ps_setup
(change the drive letter as needed for your system).
8. Select the INF file for the version of the Windows operating
system that you are running and continue with the
installation according to the on-screen instructions.
9. When installation is done, click Finish.
Using the Printer Driver For Windows
3
3
3
3
3
3
3
3
3
3
3
3
43