Epson EPL-6200 Reference Manual page 55

Installing the PostScript printer driver for the parallel interface
Follow the steps below to install the PostScript printer driver for
the parallel interface:
Note:
You must have at least 6 MB of free space on your hard disk drive to
install the PostScript printer driver.
1. Insert the CD-ROM that shipped with your printer into the
CD-ROM drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Follow the
on-screen instructions until the screen asking you to select the
printer model is displayed.
5. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\AdobePS\english\win9x\ps_setup
(change the drive letter as needed for your system).
6. Select the INF file for the version of the Windows operating
system that you are running and continue with the
installation according to the on-screen instructions until the
screen asking you to select the port the printer is connected to
is displayed.
7. Select LPT1 as the port the printer is connected to, and then
click Next. Follow the on-screen instructions for the rest of the
installation.
8. When installation is done, click Finish.
38
Using the Printer Driver For Windows