Epson EPL-6200 Reference Manual page 154

The settings and the buttons that appear in the Page Setup dialog
box are explained below.
Cancel
Click this button to exit the dialog box without saving any
changes you made.
Page Attributes
Paper
Select the desired paper size from the Paper pop-up menu. This
setting must match the size of the paper loaded in the printer. The
paper sizes that are available will differ according to the printer.
The default setting is either A4 or Letter, depending on your
country of purchase.
Orientation
Specify whether the page is to be printed in the portrait (vertical)
or landscape (horizontal) orientation.
Scale
This setting enables you to shrink or enlarge the image to print.
You can enter any percentage from 25% to 400%. The default is
100%. To shrink the image, specify a percentage that is lower than
100%. To enlarge the image, specify a percentage that is higher
than 100%. However, if you can shrink or enlarge the image to
print in the application that you are printing from, do so in the
application and not through the printer driver.
Booklet
Select this check box to print out two document pages on a single
sheet of paper. When the sheet is folded in half, it will form a
booklet. You can set the page orientation for either left-right or
top-bottom folds.
Using the Printer Driver For Macintosh
4
4
4
4
4
4
4
4
4
4
4
4
137