Epson EPL-6200 Reference Manual page 164

MediaType
Select the desired paper type to print on. The options are Normal,
Thick, Extra Thick, and Transparency. Make sure to select the
correct paper type to avoid smearing or wasting ink.
Density
Specify the density to print in. The options are Lightest, Light,
Medium, Dark, and Darkest.
Collate
Select the On radio button to print multiple copies of the
document in page order. If None is selected, each page is printed
out the specified number of times before the following page is
printed.
Note:
If you enable the Collate option here (On is selected), do not set the
Collate option in the application itself.
Start Page
Select this check box to start printing from the second (back) page,
leaving the first page blank. This setting is enabled only when the
Print on Both Sides check box on the Layout setup option page
is selected.
Image Protect
Select this check box to give priority to the quality of the printed
image. When this is selected, lossy compression is not used even
when memory runs low during printing. If this check box is left
unselected, lossy compression is used when memory resources
are too low.
RITech
Select this check box to use RITech when printing. RITech
improves the appearance of printed lines, text, and graphics.
Using the Printer Driver For Macintosh
4
4
4
4
4
4
4
4
4
4
4
4
147