IBM HS40 - BladeCenter - 8839 Maintenance And Troubleshooting Manual page 91

Hardware maintenance manual
Hide thumbs Also See for HS40 - BladeCenter - 8839:
Table of Contents

Advertisement

Note: See Chapter 7, "Parts listing, Type 8839," on page 105 to determine which components should be replaced by
a field service technician.
Error code/symptom
8141
(Microprocessor 2 failed FRB-3 timer)
8142
(Microprocessor 3 failed FRB-3 timer)
8143
(Microprocessor 4 failed FRB-3 timer)
8160
(Microprocessor missing microcode)
8180
(BIOS does not support current stepping
for microprocessor 1)
8192
(L2 Cache size mismatch)
8193
(CPUID, Processor Stepping are different)
8194
(CPUID, Processor Family are different)
8196
(Processor Models are different)
8197
(CPU Speed mismatch)
8300
(Baseboard Management Controller failed
to function)
8301
(Front Panel Controller failed to function)
FRU/action
1. Run the Configuration/Setup Utility program, and enable the
processor retest.
2. Microprocessor 2.
1. Run the Configuration/Setup Utility program, and enable the
processor retest.
2. Microprocessor 3.
1. Run the Configuration/Setup Utility program, and enable the
processor retest.
2. Microprocessor 4.
1. Update BIOS code.
2. Check latest BIOS release notes for supported microprocessors.
3. Replace microprocessor with supported microprocessor.
4. Update BIOS to current level.
1. Replace microprocessor.
2. Make sure that all microprocessors are the same stepping, speed,
family, and cache size.
3. Update BIOS to current level.
1. Microproocessor.
2. Make sure all processors are the same stepping, speed, family, and
cache size.
1. Make sure all processors are the same stepping, speed, family,
and cache size.
2. Microprocessor.
1. Make sure all processors are the same stepping, speed, family,
and cache size.
2. Microprocessor.
1. Make sure all processors are the same stepping, speed, family,
and cache size.
2. Microprocessor.
1. Make sure all processors are the same stepping, speed, family,
and cache size.
2. Microprocessor.
1. Update the BMC and SDRs with the most current versions that
are compatible with your system configuration.
2. I/O board.
1. Microprocessor 1
2. Microprocessor 2
3. Microprocessor 3
4. Microprocessor 4
5. Processor board
Chapter 6. Symptom-to-FRU index
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eserver bladecenter hs40 type 8839

Table of Contents