Removing The Blade Server From The Bladecenter Unit - IBM HS40 - BladeCenter - 8839 Maintenance And Troubleshooting Manual

Removing the blade server from the BladeCenter unit

The following illustration shows how to remove the blade server from the
BladeCenter unit.
The following illustration shows how to remove the blade server from the
BladeCenter T unit.
Attention:
v To maintain proper system cooling, do not operate the BladeCenter unit without
v Note the bay number. Reinstalling a blade server into a different bay than the
Type 8720 or 8730
ESD
Bezel assembly
either a blade server, expansion unit, or filler blade installed in each blade bay for
more than 1 minute for the BladeCenter unit and 20 minutes for the BladeCenter
T unit.
one from which it was removed could have unintended consequences. Some
configuration information and update options are established according to bay
number; if you reinstall the blade server into a different bay, you might need to
reconfigure the blade server.
Chapter 4. Installing options
39