Technical Specifications; General Specifications - NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual

This appendix provides technical specifications and factory default settings for the WG103
ProSafe 802.11g Wireless Access Point.

General Specifications

Specification
Network Management
Maximum Clients
Status LEDs
Power Adapter
Electromagnetic Compliance
Physical Specifications
Environmental Specifications
Data Encoding
Maximum Computers Per
Wireless Network
802.11b and g
Radio Data Rate
802.11b and g
Operating Frequencies and
Channels
Antenna
802.11 Security

Technical Specifications

Technical Specifications
Description
• Web-based configuration and status monitoring
• Remote console using the CLI
• SNMP support.
Limited by the amount of wireless network traffic generated by each node;
typically 15 to 20 nodes.
Power/Ethernet LAN/Wireless LAN/Test
12V DC, 1 A
FCC Part 15 Class B, CE, C-TICK
Dimensions (length x width x height):
158 mm x 101 mm x 29 mm [6.22 in. x 3.98 in. x 1.14 in.]
Weight: 402.5 g [0.89 lbs]
Operating temperature: 0 to 45° C
Operating humidity: 10-90%, non-condensing
802.11b: 1 and 2 Mbps, Direct Sequence Spread Spectrum (DSSS)
802.11b: 5.5 and 11 Mbps, Complementary Code Keying (CCK)
802.11g: All rates, Orthogonal Frequency Division Multiplexing (OFDM)
Limited by the amount of wireless network traffic generated by each node.
Typically 30-70 nodes.
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and 108 Mbps (Auto-rate capable)
2.412 ~ 2.462 GHz (North America), Channels 1-11
2.412 ~ 2.472 GHz (Europe including France and Spain, and Japan),
Channels 1-13
One (1) external 5 dBi 2.4 GHz detachable antenna
40-bits (also called 64-bits), 128, and 152-bits WEP data encryption; WPA
and WPA2
v1.0, February 2009
Appendix A
A-1