802.1Q Vlan Settings - NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual

Figure 5-2
3. Enter the following settings:
• HTTP Redirect,. Select the Enable radio button to redirect a HTTP request.
• Redirect URL. Enter the URL to which the HTTP request must be redirected.
4. Click Apply to save your settings. The Hotspot feature is now enabled and the first HTTP
request will be redirected to the supplied URL.

802.1Q VLAN Settings

The 802.1Q VLAN protocol on the wireless access point logically separates traffic on the same
physical network.
To configure VLAN settings:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Configuration > System > Advanced > General. T802.1Q VLAN settings screen
displays (see Figure 5-3 on page
Advanced Configuration
WG103 ProSafe 802.11g Wireless Access Point Reference Manual
5-4).
v1.0, February 2009
5-3