NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual page 111

| | |-write-community
| |
| |-spanning-tree
| |-time>
| | |-custom-ntp-server
| | |-daylightsaving
| | |-ntp-client
| | |-ntp-server
| | |-time-zone
| |
| |-vlan>
| | |-management-vlan
| | |-untagged-vlan
| | |-untagged-vlan-status
| |
|
|-exit
|-file
|-firmware-upgrade
|-password
|-restore-configuration
|-restore-default-password
|-show>
| |-configuration
| |-interface>
| | |-eth>
| | | |-statistics
| | |
| | |-wlan>
| | | |-2.4GHz>
| | | | |-configuration
| | | | |-knownaplist
| | | | |-stationlist
| | | | |-statistics
| | | | |-trusted-stationlist
| | | | |-unknownaplist
| | | |
| | | |-5GHz>
| | | | |-configuration
| | | | |-knownaplist
| | | | |-stationlist
| | | | |-statistics
| | | | |-trusted-stationlist
| | | | |-unknownaplist
| | | |
| | |
| |
| |-log
Command Line Reference
WG103 ProSafe 802.11g Wireless Access Point Reference Manual
--SNMP WriteCommunity
--enable spanning tree protocol
--time Setting
--custom NTP server host name
--daylight saving
--NTP client host name
--NTP server host name
--time zone
--vlan settings
--vlan management id
--untagged vlan id
--untagged vlan status
--logout from CLI
--
--upload new system firmware file
--system password
--restore system configuration
--restore default system password
--show system settings
--show system configuration
--show wireless lan interface
--ethernet interface
--show ethernet statistics
--wlan interface settings
--2.4GHz wlan interface settings
--interface configuration
--known access point list
--station list
--interface statistics
--trusted station list
--unknown access point list
--5GHz wlan interface settings
--interface configuration
--known access point list
--station list
--interface statistics
--trusted station list
--unknown access point list
--system log
v1.0, February 2009
C-13