Viewing The Available Wireless Stations Table - NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual

WG103 ProSafe 802.11g Wireless Access Point Reference Manual

Viewing the Available Wireless Stations Table

The Available Wireless Stations table contains a table of all wireless devices associated with the
wireless access point for the wireless network name (SSID).
To display the Available Wireless Stations table:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Monitoring > Wireless Stations. The Available Wireless Stations table displays.
Figure 4-10
For each device, the table shows details such as the MAC address, BSSID, SSID, channel,
rate, and status (whether or not the device is allowed to communicate with the wireless access
point). For full details about a wireless station, select the corresponding radio button, and click
Details.
Note that if the wireless access point is rebooted, the table data is lost until the wireless access
point rediscovers the devices. To force the wireless access point to look for associated devices,
click Refresh.
4-12
v1.0, February 2009
Managing Your Network