NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual page 56

WG103 ProSafe 802.11g Wireless Access Point Reference Manual
Figure 4-3
3. Select the Yes radio button.
4. Click Apply to reboot the wireless access point.
Using the Software to Restore Factory Default Settings
To use the software to restore all settings to the factory default values:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Maintenance > Reset > Restore Defaults. The Restore Defaults screen displays.
Figure 4-4
3. Select the Yes radio button.
4. Click Apply. The factory default settings will be restored.
4-4
v1.0, February 2009
Managing Your Network