Network Management Information; Viewing The Activity Log - NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual

WG103 ProSafe 802.11g Wireless Access Point Reference Manual
Figure 4-5
4. Click Browse to navigate to the location where the upgrade file is stored.
5. Click Apply to upgrade the firmware.
When the upload completes, your wireless access point automatically restarts. In some cases, you
might need to reconfigure the wireless access point after upgrading.

Network Management Information

The wireless access point provides a variety of status and usage information, which are discussed
in the following sections.

Viewing the Activity Log

You can view the activity log on screen or send it to a syslog server.
Viewing the Activity Log on Screen
To view the activity log on screen:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
4-6
v1.0, February 2009
Managing Your Network