Configuring Wireless Connectivity; Procedure 2-8: Serial Port Internet Connection Configuration - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall

Configuring Wireless Connectivity

Use the procedure below to configure an Internet connection via the serial port of your firewall.

Procedure 2-8: Serial Port Internet Connection Configuration

There are three steps to configuring the serial port of your firewall for an Internet connection:
Connect the firewall to your ISDN or dial-up analog modem
1.
Configure the firewall
2.
Connect to the Internet
3.
Follow the steps below to configure a serial port Internet connection on your firewall.
Connect the Firewall to your ISDN or dial-up modem
1.
Turn off your Modem and connect the cable (C) from your FR328S's serial port to the
a.
modem.
ISDN or
analog modem
Figure 2-12: Connect the ISDN or analog modem to the firewall
Turn on the modem and wait about 30 seconds for the lights to stop blinking.
b.
Connecting the Firewall to the Internet
C
LO CA L
1 0 / 1 0 0 M
M O DEM 8 7 6 5 4 3 2
1 2 V D C O . 5 A
IN TER N ET
1
2-17